Iplagi ye-Snap-In Vent AYN-D8.6 TT10HO
| IIPROPATI ZOMZIMBA | UMGANGATHO WOVAVANYO OQHELEKILEYO | IYUNITHI | IIDATHA ZOQINISO |
|---|---|---|---|
| Izinto zokuPlaga | / | / | I-TPV |
| Umbala wePlag | / | / | Mnyama |
| Ukwakhiwa kweMembrane | / | / | I-PTFE / PET engalukwanga |
| Ipropati yoMphezulu weMembrane | / | / | I-Oleophobic & Hydrophobic |
| Ireyithi yokuHamba komoya encinci | I-ASTM D737 (Indawo yoVavanyo: 1 cm²) | ml/min/cm² @ 7KPa | > 500 |
| Ireyithi yokuHamba komoya eqhelekileyo | I-ASTM D737 (Indawo yoVavanyo: 1 cm²) | ml/min/cm² @ 7KPa | 800 |
| Uxinzelelo lokungena emanzini | I-ASTM D751 (Indawo yoVavanyo: 1 cm²) | I-KPa ihlala i-30 sec | >100 |
| IP Grade | IEC 60529 | / | IP68 |
| Ukuhanjiswa koMphunga wokufuma | I-ASTM E96 | g/m²/24h | >5000 |
| IBanga le-Oleophobic | IAATCC 118 | IBanga | ≥7 |
| Ubushushu beNkonzo | IEC 60068 - 2 - 14 | °C | -40℃ ~ 125℃ |
| ROHS | IEC 62321 | / | Hlangana neeMfuno ze-ROHS |
| REACH (SVHC Substances) | UKUFIKELELA kuMgaqo (EC) 1907/2006 | / | Hlangana neeMfuno ze-REACH |
Ubomi beshelufu yiminyaka emi-5 ukususela kumhla wokufunyanwa kwale mveliso ukuba nje le mveliso igcinwe kwipakethe yayo yokuqala kwindawo engaphantsi kwe-80° F (27° C) kunye ne-60% ye-RH.
Zonke iinkcukacha ezingentla ziyidatha eqhelekileyo yemathiriyeli ye-membrane ekrwada, kubhekiselwa kuyo kuphela, kwaye akufanelekanga ukuba isetyenziswe njengedatha ekhethekileyo yolawulo lomgangatho oluphumayo.
Lonke ulwazi lobugcisa kunye neengcebiso ezinikwe apha zisekelwe kumava angaphambili ka-Aynuo kunye neziphumo zovavanyo. U-Aynuo unika olu lwazi ngokolwazi lwakhe, kodwa akathathi xanduva ngokwasemthethweni. Abathengi bayacelwa ukuba bahlolisise ukufaneleka kunye nokusetyenziswa kwisicelo esithile, ekubeni ukusebenza kwemveliso kunokugwetywa kuphela xa zonke iinkcukacha ezifunekayo zokusebenza zikhona.














